Quantcast
Channel: All HPE EVA Storage posts
Browsing all 1900 articles
Browse latest View live

Re: EVA4400 - Command View License - Lost after upgrade

Hiif you have command view server the license is on the serverif youwere using the managment module then you have a problemRegards 

View Article


Re: EVA 8400 Multi disk failures

Hey, im having the same issue.   was this ever resolved?    Can you post the resolution?

View Article


Re: EVA 8400 Controller Procedure

Please refer to the link given below for "HP StorageWorks controller enclosure replacement...

View Article

Re: EVA 8400 Controller Procedure

Hello,We have a video available to lead you through the controller replacement procedure.Go to http://h20464.www2.hp.com/index.htmlSelect Storage under Product CategoryUnder Product family, select EVA...

View Article

Re: Adding one shelf to existing EVA6300 ?

Hello,Maximum of 10 disk shelves are supported on P6300.Depending on your choice of LFF or SFF disk enclosure, the maximum supported disk drives are:•120 LFF•250 SFF•(25 SFF SSDs)•Or combinations of...

View Article


Re: Adding one shelf to existing EVA6300 ?

 cool, thanks for the assistance. so yes, I assume that I can just daisy chained or continue expanding the array with additional disk shelf from the last shelf ?(continue the SAS cable connection...

View Article

Re: Adding one shelf to existing EVA6300 ?

Hello,In the document, instructions are for disk enclosures being added above the controller enclosure, with the existing disk enclosures placed below the controller enclosure.The kit contains two SAS...

View Article

Re: HP EVA P6000 Allocated storage above warning

Thanks - Warning set to 89 and critical to 93...Regards, Lars.

View Article


Re: EVA4400 - Command View License - Lost after upgrade

Hiif you have a server with command view that manages EVA systemsall licneses of EVA's connected to this server are placed:C:\Program Files (x86)\Common Files\Hewlett-Packard\HPCvEvaLic\datathe file...

View Article


Fibre Channel Switch Zoning Issues

Good afternoon everyone!I’ve got some oddities with the setup of our fibre channel switching. The setup is as follows:Two duplicate racks, each with:c7000 Blade chassis2 * VC FlexFabric modulesMultiple...

View Article

HPE EVA P6300 Disk Drive Replace SAS disc problem

Hi all, i want to replace a new disk to my array, When i plug to server, it's show a message :"Drive is unsupported"I find the result that maybe the firmware version problem on the new SAS disk, Array...

View Article

Re: MIB Brocade HP B-series 8/12c SAN Switch BladeSystem c-Class

This is why....Your link leads to a "Product not found" page. HP has messed up so many hotlinks migrating half the server stuff to the hpe domain. It's so infuriating. For future Googlers out there,...

View Article

Steps to wipe EVA6400

Hey allWe recently acquired a large quantity of servers and storage-hardware, including an EVA6400. Since we have no need for this storage system, it was decided to remove all old data on it and sell...

View Article


Re: HPE EVA P6300 Disk Drive Replace SAS disc problem

Look here:http://community.hpe.com/t5/Storage-Area-Networks-SAN/Problem-at-P6500/m-p/6853387#M67569Replace the Replacement Disk. :-) 

View Article

Image may be NSFW.
Clik here to view.

Setting up DR lun SAN to SAN Replication please help

Hi,I am trying to set up DR replication of a lun from our one HP EVA 4400 san to our 2nd HP EVA 4400 located a state away. I have a MPX100b and MPX110 set up on both sides with fcip routes configured...

View Article


Re: Setting up DR lun SAN to SAN Replication please help

HiI don't remember the exact screen but in the data replication you have to setup thecommunication path and the default is not fiber.  from SSSU command guideSET DR_PROTOCOLThe SET DR_PROTOCOLcommand...

View Article

Re: Problem with cache batteries in EVA8100.

Hi Greybeard,I am having problems locating which chip you meant, the only one i can find anything online about is the microcontroller PIC16F818 if you could give any insight that would be greatly...

View Article


EVA 4400 Protection level and Raid level

Hello,If I have this:9x146GB and 3x450GB disk on EVA 4400 with 1 controller and 1 disk shelf and 1 disk group.What is the best config for having the best protection?- Protection lvl 1, vraid 5?-...

View Article

3par passwordless ssh

Hi there,I noticed a few scripts exist such as http://community.hpe.com/hpeb/attachments/hpeb/3par/1009/1/3par_create_virtual_copy.txtwhich means it must be somehow possible to [ssh myuser@my3par...

View Article

Re: EVA 4400 Protection level and Raid level

HiProtection level is disk space left for sparing that will not appear in your total capacity.this capacity is always from the largest disk size that is single protection means you lose 2 disks (2 X450...

View Article
Browsing all 1900 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>