Re: HP SAN 4/32 - HP Serial and "Defaults" Not Allowing Console Login
I believe I've been using a G16 serial cable, which won't work here?I've ordered a modular serial kit to make the serial myself. Does anyone have the wiring diagram for the serial needed here (RJ45 and...
View ArticleRe: HP SAN 4/32 - HP Serial and "Defaults" Not Allowing Console Login
The port requires a straight serial cable with a female 9-pin subminiature-D connector.Only pins 2, 3, and 5 are supported.Pin Signal Description1 Not supported2 RxData Receive data3 TxData Transmit...
View ArticleRe: Management module on EVA4400 troubleshooting
Hello..I know this post is old but i'm having some kind of troubles resetting the Management Module, I've done all the three methods you mentioned and I'm still unable to ping 192.168.0.1, I changed my...
View ArticleResetting EVA 4400 Management Module Not working
Hi...As mentioned in the title I'm having troubles resetting my EVA Management Module, I tried restarting the module, reseting it and pulling it out and re-pluging it again but I'm still unable to ping...
View ArticleRe: Management module on EVA4400 troubleshooting
Unfortunatelly there is almost nothing to troubleshoot here.Pressing the reset button for >10 sec will reset to factory defaults, the LED should be green.It should now answer tohttps://192.168.0.1:2373
View ArticleRe: HITACHI- SAN - UCMDB Discoveries
I'm also interested to see what others have to say about this.
View ArticleAlerts
Hi Guy's,I am new to XP 24000 Storage Array, in this AlertsRef.Code: EF2219, 461219 and BF5210Error Level: ServiceStatus: Not CompleteWhat is the meaning of these alerts, Please help me Regards,MNR
View ArticleRe: Alerts
46 1X XX = dynamic sparing startEF 2x xx = Drive blockade (Effect of Dynamic sparing normal end)This means a disk (coded as X XX) has failed and the sparing process has finished, the disk can be...
View ArticleCommand View License Purchase
Hi Guys,Looking for some advice on EVA4400/EVA8400 in particular the command view software.......I have a few pallets of both EVA Systems that i need to test, i have downloaded the demo for P6000...
View ArticleRe: Command View License Purchase
IIRC the CV license is bound to the array hardware, so a single license would not help you.I would install a fresh (trial) version on a virual machine, so you can restore it easily each time it times out.
View ArticleRe: Command View License Purchase
Thank you Torsten.........I had a feeling that would be the case.....I will just re-install when needed then at least it is saving me 7000 pound lol does the temp licenses still exist when you...
View ArticleStorageworks Command view EVA, no storage systems are available.
When I connect to the EVA, I get the above message saying that there is no storage systems available. We have changed the network switches this past weekend and it seems to conincide with that. No...
View ArticleRe: Storageworks Command view EVA, no storage systems are available.
do you use more than a single cv instance? array based vs. server based management for example?
View ArticleRe: Storageworks Command view EVA, no storage systems are available.
I am still trying to get a full grasp on how the network and servers are configured, but getting there, I've been here less than a year. As far as I know it is the only instance of this CV we are using...
View ArticleHP EVA6500 Mirror clone best practices
We are planning to take Mirror clone of a VDisk to different DG. Detach the original Vdisk and present the Mirror clone Vdisk to the server. Do we need any down time for this or precautions to be...
View ArticleHSV 300 (EVA 4400) Read Only System
We have a StorageWorks HSV 300. After installing 8 drives (6 600GB and 2 450 GB) and intializing the system, we get an error trying to manage it. Using the Command View EVA on a management server and...
View ArticleRe: HSV 300 (EVA 4400) Read Only System
Mmm, I'm not quite sure of how to get that information. If you're could tell me what commands/actions to do, I would gladly execute them and post my results.Thanks for your interest!
View ArticleRe: HSV 300 (EVA 4400) Read Only System
for cv just click on help at the top of the page. i am not sure about an uninitialized eva, bit you shoulg get the version from the management module.
View Article