Clik here to view.
Cable and switch for eva4400
I'm a little confused about EVA4400 cabling.If i buy a switch like this Wich cable i need?FC/FC?I want to connect to HSV300 controller and to this hb adapter I'm a little confused about...
View ArticleRe: Cable and switch for eva4400
hiI think you IBM is 1GB output so you would need LC - SC cable some thing like...
View ArticleRe: Cable and switch for eva4400
I still not buy the ibm switch,is only an idea.Can you suggest me please something with more speed or do you think 1GB is sufficient for SANtesting?
View ArticleRe: Cable and switch for eva4400
Hiyour HSV300 is 4GB and your HBA from the picture is 2GB or 4GB you need at least a 2GB switch some thing like...
View ArticleRe: Silly question about hp card for SAN
hmm, such test will be only partial. At least you will check if card look ok under operating system. But still you can find problem in the future whent conecting to SAN. Jan
View ArticleHow to migrate HP EVA P6350 from FC environment to a pure ISCSI environment?
Hi, How to migrate HP EVA P6350 from FC environment to a pure ISCSI environment? Please find details of the product. HP EVA P6350 900GB 10K SAS FIELD STARTER KIT EVA P6350 Dual Controller array FC with...
View ArticleRe: How to migrate HP EVA P6350 from FC environment to a pure ISCSI environment?
The EVA (P6000) is either FC only or a FC/iSCSI combo.For ISCSI you need a server or protocol router to "translate" somehow to iscsi, if you have the FC only model. But you may consider to swap the...
View Article5 disks failed on EVA
Hi I have an old EVA4000 with 2C4D configuration and 1 DG, for some reason I found out 5 disks that are in a failed state, I have replace one, for now, the in command view eva, its shown as leveling,...
View ArticleRe: 5 disks failed on EVA
If a disk in an EVA fails, the array starts to reconstruct and get redundant again as long as there is enough free space. So if there is enough space and "enough" time between disk failures, your array...
View ArticleRe: 5 disks failed on EVA
As for storage capacity, I have the following: Total: 10102.35 GBUsed: 9115.86 GBAvailable: 986.49 GB I have already replace 1, and leveling is a 6%. Shall I go ahead and replace the remaining 4?
View ArticleRe: 5 disks failed on EVA
If you see "reconstruct" you need to wait. Don't wait for leveling.
View ArticleRe: 5 disks failed on EVA
At the Conditional/State, header I see: Operational state: AtentionLeveling state: In progressLeveling progress: 9% leveledRSS Disk state: none
View ArticleRe: 5 disks failed on EVA
Replace the disks now, select the DG and group the new available disks all at once. So the EVA needs to do a single leveling but not level 5 times.
View ArticleRe: 5 disks failed on EVA
Does the leveling process slows down the servers with file systems on the EVA?
View ArticleRe: 5 disks failed on EVA
If you select one of these disks now, you should see the occupancy level growing.
View ArticleMSA1000 one battery failed and host can't see any luns after presented
We are setting a msa to build a testing environment. The battery of a controller is shown failed and the write cache is disabled. And the "show connections" indicated the host ports of the two...
View ArticleEVA4000 battery cache failure
Hi I have Cache Battery Modules with the following information in controller B: Operational state: FailedCharger state: Failed I will be replacing soon, but my question is: Do I have to power down the...
View Article