Re: Loop B Operational State: Failed. clicking Enable does nothing
Hello Matt_HaleThis EVA 4000 (HSV200 is EVA4000) has mis behaving backend device and that is why we are seeing this behaviour. It could be a drive, cable, IO module or even any of the controllers....
View ArticleRecovery HP EVA 6400
Hi,We have an HP EVA 6400 (2 controllers). One of the controllers failed, the RAM and the memory card failed on it.We bought a new controller and want to put it in place of the failed. In all the...
View ArticleRe: Recovery HP EVA 6400
Hello AVAstr,I understand that you are referring to a faulty program card. On the EVA 6400, the program card is an FRU that can be replaced...
View ArticleStorage EVA 6400 "Connection State: Link Lost" and I/O Module B "Operational...
Hello All,First of all, thank you for taking your time reading this new topic,.I have a problem with the Storage EVA 6400, Today I decided to see physically the Storage from behind and I noticed that...
View ArticleEVA 4400 - Address test verification failure
Hi all,we wanted to change the configuration of an eva 4400. We uninitialised the system, shut down the system and removed two of the eight disk shelfes. After powering on again, the management modules...
View ArticleRe: Recovery HP EVA 6400
hi, NimaGTell me, we brought a completely new controller, it has this card, but it is recommended to put a card out of a failed controller, how to replace the controller correctly, if the old card is...
View ArticleUnable to find EVA in command view
Hi All,I have 4 EVA (8400 and P6500) at one site and using a single site management server (stms) . I am unable to find one EVA in the CV EVA. Server restarted but no luck.I would like to know, if the...
View ArticleRe: Recovery HP EVA 6400
Algorithm of actions:1. Turn off storage2. Inclusion of disk shelves (waiting ~ 5 minutes) 3. Turning on the working controller (waiting for full load WWN / Name) (WITHOUT a new one) 4. The inclusion...
View ArticleRe: Unable to find EVA in command view
Ok issue resolved by adding server HBA WWPN to zone config. Also learned that there is no dedicated FC interface on storage for Site management server connectivity. Thanks.
View ArticleRe: EVA 4400 - Address test verification failure
Hi D. Buettner,The "Address test verification failure" error is pointing to DIMM issue.In-depth cache diagnostics are run only at power on of a controller. Normal runtime diagnostics will determine if...
View ArticleRe: Unable to find EVA in command view
Hi baiju625,As mentioned by you, you need to zone Controller FC port to the Command view EVA server HBA for CV-EVA to manage EVA. There is no dedicated FC port for management.After performing the...
View ArticleRe: EVA 4400 - Address test verification failure
Hi Yeskay,thank you for the information. We will check the dimms. Kind regards,Dieter
View ArticleP2000 G3 iSCSI MSA Unable to create Vdisk
Hello All,My P2000 currently has one Vdisk and I am trying to add another Vdisk to perform a volume copy operation. The existing Vdisk consists of nine 600 GB SAS drives, including the spare, in a RAID...
View ArticleP2000 G3 iSCSI MSA Question
Hey All,I need to perform a volume copy. I think what I need to do is to expand the existing Vdisk, then create a new volume using the expanded space.Here is my problem: The current Vdisk is using 600...
View ArticleRe: Storage EVA 6400 "Connection State: Link Lost" and I/O Module B...
Hello AlexBriner,I understand that Disk Enclosures 1, 2 and 3 appear to have issues on Loop B.Before proceeding, please ensure Loop A is up and functional.You may reseat the I/O Module B on Disk...
View ArticleRe: Storage EVA 6400 "Connection State: Link Lost" and I/O Module B...
Hello NimaG,Thank you for helping me with this issue. :)I will let you know as soon as we have news following the steps you have mentioned.Regards,Alexander Briner.
View ArticleRebuild EVA4400 deleted configuration to original VDISKs access.
Good morning,I'm new to this community and I do not have a thorough knowledge of the EVA4400, so I apologize in advance if I will write something inappropriate, but I need your experience to understand...
View ArticleRe: Rebuild EVA4400 deleted configuration to original VDISKs access.
I'm not really sure what your goal is ...Lost data remains lost.If you want to restore the configuration, consider to initialize the array and restore the configuration backup, what each admin...
View ArticleRe: Rebuild EVA4400 deleted configuration to original VDISKs access.
Thanks for the attention, but my goal is just to "try" to recover data, creating a new array with new HDDs and a configuration identical to the one that was deleted when the HDD with my data had...
View ArticleRe: Rebuild EVA4400 deleted configuration to original VDISKs access.
Talking to some HP consultants, I understood that there is the possibility that an EVA (possibly uninitialized or that no longer finds on board the HDDs with the configuration it knows) can read the...
View Article