Quantcast
Channel: All HPE EVA Storage posts
Browsing all 1900 articles
Browse latest View live

Re: 4/16 SAN Switch password reset

hiif you don't have password you will have to connect with serial console reset the switchand follow instructions in attached pdf.53_1000114_02_FOS_Password_Recoveryfind the procedure that suits your...

View Article


Command view 9.1

Hi all i need to find command view 9.1 for EVA4000. We have running 8.0 but i didn't run fieldservice utility. I get procedure for resync disk group but this procedure is 9.1 compliance. Best regards

View Article


Re: Command view 9.1

There are no working public  links available for command view 9.1 for EVA4000.Below procedure for resynch should work for command view 8 as well.https://hostname:2372/fieldservice.2a without Argument...

View Article

Part number of the serial console cable for the EVA6100

hello sr. do you have the  spare part numbre of the serial console cable for the EVA6100 and the conf of the communication?regards Moderator: P.S: This post was moved as a new topic from the following...

View Article

Re: Part number of the serial console cable for the EVA6100

Hello,There is a document on the cable that might be of use to you.https://support.hpe.com/hpsc/doc/public/display?docId=c03214107Unfortunately, this system has been End of Support Life for some time....

View Article


Re: Part number of the serial console cable for the EVA6100

thanks dude, in fact i worked for HPE, but with the new bissness unit Unisys i decided do not continue, and actually i work with a partnerthanks for tue support

View Article

EVA4400 - Controller with error

Hi,We have an EVA4400 and one of the HSV300-S controllers shows an error:https://ibb.co/G98tRVDAnd some of the IOs modules shows also an error. But not all of them.https://ibb.co/tcxKz84How can we...

View Article

Re: EVA4400 - Controller with error

Hi there,As far i can tell from the pictures some of your FC I/O Modules are probably dead...We have the same storage and we are 'replacing" these modules every year for the last 3 years...

View Article


How to Decrease Storage Capacity to meet CV General Capacity Limit in EVA4K...

HiWe HP SAN with 1 Blade servers Chassis, MDS switch, 2 disk arrays and 2 HSV200 controllers.Our unlimited capacity lic is expired by still have permanent CV General Lic of 2TB. Our disk capacity (6TB)...

View Article


Re: How to Decrease Storage Capacity to meet CV General Capacity Limit in...

Got it by myself..Ungrouped number of hard disks until reached under limit.

View Article

Re: EVA4400 HSV300-S Swtich/Controller

Just tried the procedure and found an error....You wrote: 7. /usr/bin/passwddefault (file not found)Correct is: 7. /sbin/passwddefault (tried it and it its working)Greetings

View Article

Disk enclosure AG638B I/O module MFG serial port - how to?

I have an AG638B FC disk enclosure from an EVA4400 system with a defective I/O module. The module shows all green LED and also the ID is diplayed correctly but it has no link on both FC channels.So I...

View Article

EVA4400 cache battery repair

It seems difficult to still get new EVA4400 (HSV300) cache batteries. They are end of life and the used ones are possibly as bad as the ones you try to change.I found a method to repair them.... and...

View Article


Re: Disk enclosure AG638B I/O module MFG serial port - how to?

OK... I answer that myself. The magic word is "menu"

View Article

Re: Disk enclosure AG638B I/O module MFG serial port - how to?

Unlikely.You can get some status information and set the enclosure ID.

View Article


Re: Disk enclosure AG638B I/O module MFG serial port - how to?

Yes... it seems that is all I can do here.At least I got one clue what could be wrong. The module reports it's boot software version as "???" which is a bit weird. And it does not update it's firmware...

View Article

pb P6300 drive Failed

hii have a pb when i want to change  a disk SAS failed on my EVA.i see the disk and i can upgrade it but when i want to group it i have message "drive unsupported".i change twice disk the problem it's...

View Article


Re: pb P6300 drive Failed

Hi,613921-001 is the right spare part number however we need to ensure it matches with the HP P/N used for SAS supported disk meant for EVA which is 619286-002.One HP P/N (693569-002) is meant for...

View Article

Re: pb P6300 drive Failed

hi thanksbut my spare is  583717-001  this disk is use only for EVA. i tried  a other spare 583718-001  is the same problem.i get  the error "drive unsupported" when i want to group itso it's very...

View Article

Re: pb P6300 drive Failed

Hi,The spare part numbers provided can be used in EVA as well as servers.However the seller or supplier has to prepare the disks to work in the EVA and test it before supplying.This is a factory...

View Article
Browsing all 1900 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>