Quantcast
Channel: All HPE EVA Storage posts
Viewing all 1900 articles
Browse latest View live
↧

Connecting MSA30/MSA20 to MSA100/MSA1500

February 6, 2017, 11:26 pm
$
0
0

Hi All,

I have fine workinfg disk arrays consisting of

   1) MSA1000 and one MSA30

   2) MSA1500 with 2  MSA20

They work fine with my OpenVMS system

 

However  I needed some more disk space. So I connected another MSA30 to the second SCSI connecttion on my MSA1000. I was realy disapointed when the new disks did not show up in the MSA1000 controller: I could only see the "old" disks.

Then I tried to connect a MSA20 to the MSA1500. I had to insert an extra SCSI controler into the MSA1500. But also here only the "old" disk are seen.by the MSA1500 controller. When I login directly to the MSA20 a "show disks" list all the disks. I'm a little worried by the the displayed enclosure id of the MSA20 (which is 01) and is equal to the one displayed on one of the "old" boxes.

 

What am I missing, and how can I get my MSA1000 & MSA1500 to the the new MSA20 & MSA30 boxes?

 

                              Regards

                                      Jouk

↧
Search

What is the failed size/capacity at 3par cli output?

February 7, 2017, 2:45 am
$
0
0

When I check command showpd -s, I found output as below?

Id CagePos Type -State-- Size Volume Spare Free Unavail Failed
76 3:16:0 FC degraded 838656 0 0 309248 0 529408
------------------------------------------------------------------
1 total 838656 0 0 309248 0 529408

Please point me with some explaination. Check at attached picture. 

 


03.jpg

 

 

↧
↧

Re: What is the failed size/capacity at 3par cli output?

February 7, 2017, 3:22 am
$
0
0

Hard to read because of the format ...

 

Looks like the disk 3:16 went bad and is now being vacated, I think it will be shown as failed soon.

Check the events for details.

Check if the number is growing ... if the disk is vacated, it will be shown as failed with a amber LED on.

↧

Re: EVA 8400 HSV450 2C8D Cabling guide???? plzzzzzzzzzzzzzzzzzzzzzzzzzzz

February 10, 2017, 12:00 am
↧

Connecting MSA 1040 10GbE dual controller storage with HPE FlexFabric 5700 32XGT 8XG 2QSFP+ Switch

February 11, 2017, 4:06 am
$
0
0

I want to connect my MSA 1040 10GbE dual controller storage with HPE FlexFabric 5700 32XGT 8XG 2QSFP+ Switch using 10GbE cables. Please suggest me which cable should i use and the technology behind this? is there any options without any DAC cable? if it is DAC cable how should it be connected ? 

 

Thanks

TURJO

↧
↧

Re: What is the failed size/capacity at 3PAR cli output?

February 11, 2017, 7:21 pm
$
0
0

>When I check command showpd -s, I found output as below?

 

showpd -s should provide the reason under Detailed_State:  (What HPE 3PAR OS version do you have?)

Id CagePos Type -State- -Detailed_State- -SedState--

↧

Re: HSV 300 (EVA 4400) Read Only System

December 6, 2016, 12:57 pm
$
0
0

Ok, I managed to install Command View 10.3 on Windows Server 2012 and updated EVA's firmware to 11300000.

Then I uninitialized the system using the system settings of the management module at https://192.168.0.1:2373.

Finally, using Windows Server 2012 Command View 10.3, I initialized the system and now everything is working fine at last!!

Thank you so much for your help!

↧

Re: HSG80: what kind of serial cable? +host software to view controllers config

December 9, 2016, 5:41 am
$
0
0

The cable is relatively simple to make yourself. All you need is a RJ11 (6pin) cable and a DB9 (PC serial) female connector. You can use a cable from a telephone or modem. Cut off one RJ11 connector and solder the DB9 to that end.

RJ11       DB9

3+4   ->  5     
5       ->   3
2       ->   2

3 and 4 are the two center pins of the RJ11 and they both go to ground (5 at DB9), the two pins left and right from the ground are RECV_DATA and TX_DATA.

↧
Search

P6300 - Bad cabling configuration detected in the backend devices cabling - 2C4D

February 13, 2017, 1:40 pm
$
0
0

Hello community,

I recently installed online a new disk enclosure for an already online-upgraded P6300.

Initially they array had 2 disk enclosures. Some time ago I added a third below the others with no issues following the installation instructions.

Now I follow the same steps to add a fourth disk enclosure but it went not that good. Enclosure was recognized with its disks but event log sporadically logs a message like this for both controllers:

***Critical event*** Controller 2 Bad cabling configuration detected in the backend devices cabling. - 0685992d
I've uploaded images with the intermediate 2C3D cabling and the final 2C4D. The initial 2C2D was the same as in the M6625 installation intructions.

No other hardware warnings/alerts in Command View.

Any advice will be appreciated.

Thank you

Regards

↧
↧

Re: Resetting EVA 4400 Management Module Not working

February 13, 2017, 1:50 pm
$
0
0

Hi Gaisu,

Doing a long press in the reset button should factory reset the module. The leds will all turn off when the reset is complete and the module will restart.

A short press will just reboot it.

Thanks

Regards

↧

HP EVA5000 - without HSV

February 14, 2017, 5:24 am
$
0
0

Hi Guys,
there is possibility to run this stuff  drive enclosures with disks, and

364549-005 HP FC System I/O E-PBC Modul-A EVA5000
364548-005 HP FC System I/O E-PBC Modul-B EVA5000
375393-005 HP StorageWorks M5314B FC EMU ModuleMissing Items: nein

without HSV? What will happen when I connect this to Windows/Linux server? 

Rafal
↧

fdisk -l not showing EVA Virtual Disks

February 24, 2017, 8:07 am
$
0
0

Hello guys,

I'm trying to present Vdisks to a linux box but with no sucess.

Vdisks are created and presented to Host. At host level (Red Hat 6) after executing hp_scan, fdisk is only showing local disks.

These are brocade configurations:

Area Port Media Speed State Proto
=====================================
0 0 id 4G Online F-Port 50:00:1f:e1:50:11:20:59 <- controller 1
1 1 id 4G Online F-Port 50:00:1f:e1:50:11:20:5d <- controller 2
2 2 id 4G No_Light
3 3 id 4G No_Light
4 4 id 4G No_Light
5 5 id 4G No_Light
6 6 id 4G No_Light
7 7 id 4G No_Light
8 8 id 4G No_Light
9 9 id 4G No_Light
10 10 id 4G No_Light
11 11 id 4G No_Light
12 12 id 4G Online F-Port 10:00:00:00:c9:53:78:22   <- linux server hba
13 13 id 4G Online F-Port 10:00:00:00:c9:53:2d:19
14 14 id 4G No_Light
15 15 id 4G No_Light
16 16 id 4G Online F-Port 50:00:1f:e1:50:11:20:5f <-- controller 1
17 17 id 4G Online F-Port 50:00:1f:e1:50:11:20:5b <-- controller 2 
18 18 id 4G No_Light
19 19 id 4G No_Light
20 20 id 4G No_Light
21 21 id 4G No_Light
22 22 id 4G No_Light
23 23 id 4G No_Light
24 24 id 4G No_Light
25 25 id 4G No_Light
26 26 id 4G No_Light
27 27 id 4G No_Light
28 28 id 4G No_Light
29 29 id 4G No_Light
30 30 id 4G No_Light
31 31 id 4G No_Light

Active configuration:

zone: RDP 102,0
102,17
102,1
102,16
102,12

 

[root@ac03 tmp]# lssg -w

sg1   3,0,0,0         HP HSV210 6110  5000-1fe1-5011-2050

sg2   3,0,1,0         HP HSV210 6110  5000-1fe1-5011-2050

sg3   3,0,2,0         HP HSV210 6110  5000-1fe1-5011-2050

sg4   3,0,3,0         HP HSV210 6110  5000-1fe1-5011-2050

Any idea?

Thanks

 

 

 

 

 

 

↧

StorageWorks Command View EVA 9.03 License error

February 25, 2017, 3:17 am
$
0
0

Hello

         Before there is no problem, today found a connection license error, do not know what the problem is a Windows 2003 Server, recently updated hotfix, do not know if this is caused? Can help? Thank you

OS : Windows server 2003 R2 64bit

CommandView version : v9.03.00.100811

EVA.pngEVA2.png

↧
↧

Re: StorageWorks Command View EVA 9.03 License error

February 26, 2017, 3:34 am
$
0
0

When i try import license,show this error,Please Help,Thanks

Command execution failed. Error: Win32 access violation at: Ox0000000000000000

EVA3.png

↧

Re: StorageWorks Command View EVA 9.03 License error

February 26, 2017, 11:30 pm
$
0
0

Consider to uninstall CV and install the current version 10.3 (depending on the FW version of your EVAs).

↧
Search

Re: P6300 - Bad cabling configuration detected in the backend devices cabling - 2C4D

February 27, 2017, 5:00 am
$
0
0

Hi,

I decided to unplug and plug cables again and now there are no more errors. So cabling was good after all.

Thanks

↧

Re: StorageWorks Command View EVA 9.03 License error

February 28, 2017, 5:05 pm
$
0
0

Hi Torsten:

      Can you tell me how to download 10.3 Command View , this version CV support EVA 4400 , 8100 , 8400 , 4401 , Thanks

↧
↧

Re: StorageWorks Command View EVA 9.03 License error

March 1, 2017, 4:16 am
↧

Re: HP EVA 8000 COntroller Error TC:8302206b IDX:LF PARAM 00:00000800

March 3, 2017, 12:29 am
$
0
0

some times that error appears when the controller blower FAN failed.The FAN Led color becomes Orange

FAN Blower EVA 8000FAN Blower EVA 8000

 

↧

AJ763B/AH403A Drivers

March 3, 2017, 3:24 am
$
0
0

Hi,

In the company I work in they have the following HBA:

AJ763B/AH403A

The firmware is on 10.6 however in the revision history it jumps from 10.5  - 10.7 does anyone know if 10.6 was pulled for any reason? The OS is Linux 6.4 running on a Brocade Director on v7.4.0b.

The link i'm looking at for firmware is:

http://h20564.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_8f9b96cbd0ed41e880c174fb62#tab-history

Any help is apprecatied because if its been pulled it had to have been for a reason. Keen to find out why!

↧
Viewing all 1900 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>