EVA 3000 SAN Appliance GUI Issue after Loop Failure (Missing)
Hi Everyone, I am using a HP EVA3000 SAN Storage. We had experienced a strange issue after a new disk encounted a loop failure. 1) Observed one disk with Predictive Failure in Bay 10.2) Proceed to...
View ArticleRe: EVA 3000 SAN Appliance GUI Issue after Loop Failure (Missing)
First I would restart the CV service and check again. What CV version is running? Latest for EVA 3000 is 9.4.1. I saw the alarm level at 100% - this is not good at all!
View ArticleEVA 4400 Controller outage
Hi everybody,first sorry for my English, i live in a french speaking countryi need help about an eva 4400, before the question, here are somme problems with the eva:- one eva 4400 with 8 disk...
View ArticleRe: EVA 3000 SAN Appliance GUI Issue after Loop Failure (Missing)
hiyou could try doing a firmware upgrade to the disk with a problem(even to the same version that it has) this will resetthe disk in the enclosureRegards
View Articlelist Persistant Reservation(PR)
Hello, is there any possibilities to view/clear current established PR on LUN? If yes it is, then how to do that? SAN configuration: EVA P6300 / HP SAN switch Thanks in advance
View ArticleRe: EVA 3000 SAN Appliance GUI Issue after Loop Failure (Missing)
Dear giladzzz, Thanks for your reply. I was actually thinking of replacing the disk, as I do not want to take any chance of it going "missing loop" again. :) Do you know how can I replace a disk when...
View ArticleRe: EVA 3000 SAN Appliance GUI Issue after Loop Failure (Missing)
Hi Torsten, Thanks for your reply. After I restarted the SAN Applicance, it showed the disk not in a grouped state. but still a popluated data disk. The disk does not flash any more during SAN...
View ArticleHP EVA P6000 Problem
Hi Support I am writing on behalf of the company I work for. We have recently acquired an HP EVA P6000 Controller (brand new) with Command View Software and Licensing. While trying to set this up using...
View ArticleRe: HP EVA P6000 Problem
hiyou can uninitialize the system from the controller through the controller panelgo through the menu and do it from there after that you will have to put in the newWWN and Checksum Regards
View ArticleRe: HP EVA P6000 Problem
Thanks for your reply, will try again today and confirm if it works. Thanks again
View ArticleRe: HP EVA P6000 Problem
Hi again Our EVA is currently un-initialized and the problem is we cannot find a way to initialize it with the second-hand disks bought off another EVA. Would your recommendation still work...
View ArticleRe: HP EVA P6000 Problem
Hithere shouldn't be a problem to use disks from another EVA once you have managed to un-initialized the systemfrom the front panel. meaning you have to input the WWN and Checksum from the front panel...
View ArticleRe: EVA 3000 SAN Appliance GUI Issue after Loop Failure (Missing)
HiSorry for the late reply, first of all doing a firmware upgrade to one disk is the same operation as pulling it out and then putting it back in.also if you want you can just take out the disk by...
View ArticleRe: HP EVA 4400 ,which cable?
The first picture are SFP+ where the transceiver is on the cable. On the second it's LC-LC cables.
View ArticleRe: HP EVA 4400 ,which cable?
Last question: i promise.Is possible to connect directly a SAN with a SERVERSAN->SERVEROr i need a SAN switch Even with a single server?
View ArticleRe: HP EVA 4400 ,which cable?
No it's possible without switch. For direct connect without switch you need to change the setting on the FrontPort.
View ArticleRe: HP EVA 4400 ,which cable?
Perfect,thanks for all answer,i have downloaded the manual pdfand will read it to learn some SAN stuff.
View ArticleRe: Download Command View 10.3.3 (ABM) and 10.3.4 (SBM)
here is the latest link to CV10.3 patches 10.3.1 - 10.3.7http://h20566.www2.hpe.com/hpsc/swd/public/readIndex?sp4ts.oid=5158106&swLangOid=8&swEnvOid=4064
View ArticleSome question about EVA 4400
Good morning,i had some questions about EVA4400I have received the disk shelf with 12 hard diskIs possible to connect it directly to my serveror i need a module/controller like this?...
View ArticleRe: Some question about EVA 4400
Hia disk shelf can not work on it's ownyou must have a controller shelftooRegards
View Article