Re: looking for command view 7.0 and rsm 3.0
I checked in the HPE support page and could only find the hist agent for HU-UX and linux.It is not available for...
View ArticleRe: EVA4400 - Controller with error
Dear Mgfeal,Good day!The right controller has degraded health condition which might be contributing or causing loop issues. There is no DP-1A or DP-IB LEDs either.The connection status is:Right...
View ArticleRe: Where can I get this EVA Simulator?
Hello Antinon,Since the product is out of production, HPE does not have any official pages for downloads. If your HPE passport have a valid EVA contract associated, you may get it from the software...
View ArticleHPE Brocade Firmware Upgrade
Hello Members, I would like to know the process for upgrading cascaded san switches.We have two fabric each with two members. Switches are connected with ISL links & have trunk licenses.I need to...
View ArticleEVA P6500 Link module error
DearsAfter reboot EVA P6500 i found that error SC Event Code: 06558906 - An Enclosure Link Module has been failed, and can no longer be used to detect drive position information, or to issue...
View ArticleRe: EVA P6500 Link module error
The issue points to a faulty I/O module in the particular disk enclosure,reporting the error.Select the disk drive on the disk enclosure reporting this error.Loop A or Loop B should be in "not in use"...
View ArticleHP 8/8 and 8/24 SAN Switc 8-pt Upgr LTU-T5518A
HiGood day all,I ordered two T5518A to activate my san switch ports. webware.hp.com is down. How should I activate my SAN Switch ports and where I can get license key?BR
View Articledisk uncompatible on EVA6300
hi,I have added EVA SAS disks with below info :on front of the disks : Spare parts number : 583718-1 and ont he back of the disks :HP Model : EF0600FATFFHP P/N : 533871-003wite sticket : GPN...
View ArticleEVA4400 Disk replace
Hello.I am not proficient in English.I have EVA4400.One disk failed in EVA4400.in the process of leveling, can I replace the disk?Or,should it be replaced after leveling is complete?regards.
View ArticleRe: EVA4400 Disk replace
Hiif the disk is failed in command view you can replace itleveling wil restart after replacing the diskRegardsGive KUDO if this helps
View ArticleRe: disk uncompatible on EVA6300
Model EF0600FATFF can be used on Servers as will as EVA.However an EVA bit needs to be set by the Vendor or supplier before shipping for use in EVA.Hence make sure the EVA bit is set before using the...
View ArticleEVA 4400 leveling always running, starts by itself when finished, date issues
HiI have an issue with an EVA 4400 with 2 disk groups. When doing the leveling on the second disk group, the process srtarts over an over again after finishing. It shows a permanent "In Progress...
View ArticleRe: disk uncompatible on EVA6300
Hi,thanks for your answer,so if I understand well, even upgrading the Firmware from HPD7 to HPDB will not ensure disks will be work with the EVA ??also, if we keep HPD7 firmware and set the evat bit ,...
View ArticleRe: EVA 4400 leveling always running, starts by itself when finished, date...
I would suggest the below:1.Set the time manually to synch with the local command view server time.2.Perform a contoller resynchfrom the field server page.(Support team can do this)3.Make sure there is...
View ArticleRe: License Command View for Old Strutucre
There is one solution for old EVA systems. Set up a fresh management server and install CommandView 9 or whatever version you have. I don't know if this works with other versions but it definitively...
View ArticleRe: EVA 4400 leveling always running, starts by itself when finished, date...
First update to the rmv978 suggestions:1. Did not worked. The time was switched manually, but the EVA changed it to the strange date back again.2. Cannot be tested right now. The EVA is kinda critical...
View Article